Select Page

Murakami 701 Haze and Ghost Remover is a water-soluble ink and stain remover.  This product will not attack or damage the fabric.  It is highly effective on lacquer ink, lacquer stencil, enamel, vinyl, mylar, poster ink, UV ink, and plastisol inks.

TECHNICAL DATA SHEET  | SDS REQUEST

HR-700 Haze Remover is a caustic haze remover designed to remove the most difficult mesh stains.  Personnel protection equipment is needed: Nitrile gloves, protective goggles, and rubber apron.  This product can cause severe chemical burns if it comes in contact with skin. Apply with a brush and allow to sit for 5 minutes, then rinse off.  Can damage fine meshes if left on too long.  HR-700 can also be used on hardened screen emulsion to help in emulsion reclaiming.  Apply for five minutes then rinse off, then apply emulsion remover to continue screen reclaiming.

TECHNICAL DATA SHEET  |  SDS REQUEST

Latest Posts

Murakami Pre-stretched Screens

Murakami Screen uses Smartmesh on all pre stretched and re-stretched screens.  Smartmesh retains excellent working tensions for more jobs at optimum tension.  Get longer life out of your stretch and glue frames with excelle...
Read More ››

Murakami LED Emulsions

The emulsions above can be exposed well on LED exposure units. Excellent resolution and durability. For additional technical information please call: 1.800.562.3534 Expose the Quality ...
Read More ››

Murakami T9

  Murakami T9 – as seen at the ISS Show Long Beach 2018 Murakami T9 can print water base, discharge, plastisol, and high solid acrylic inks without the need for hardening.  Fast Exposing, excellent resolution and dur...
Read More ››