Select Page

MS-Bond 005, 100, and 300 are mesh adhesives designed for the bonding of screen mesh to frame instantly. Three viscosity types are designed to help the glue penetrate through the mesh and make contact with the frame for strong adhesion.  Once the activator spray is applied the bond is instantaneous. Surfaces to be bonded must be clean and dry prior to gluing mesh to frame. Green areas in chart are recommended mesh counts for the glue viscosity

MS-Bond 2 Part Adhesive is a fast drying high performance polyester mesh adhesive.  It dries quickly and has excellent sheer strength. Bonds to aluminum, wood, plastic, and all types of metal. Removing mesh glued with this adhesive is far easier than MS-Bond super glue type adhesive shown above. Glue remains flexible to prevent the knife like mesh edges that can form with super glue type adhesives. Surfaces to be bonded must be clean and dry prior to gluing mesh to frame. MS-Bond 2-Part adhesive is mixed 100 parts of adhesive to 8 parts of catalyst.  Use within 8 hours.

Latest Posts

Murakami Pre-stretched Screens

Murakami Screen uses Smartmesh on all pre stretched and re-stretched screens.  Smartmesh retains excellent working tensions for more jobs at optimum tension.  Get longer life out of your stretch and glue frames with excelle...
Read More ››

Murakami LED Emulsions

The emulsions above can be exposed well on LED exposure units. Excellent resolution and durability. For additional technical information please call: 1.800.562.3534 Expose the Quality ...
Read More ››

Murakami T9

  Murakami T9 – as seen at the ISS Show Long Beach 2018 Murakami T9 can print water base, discharge, plastisol, and high solid acrylic inks without the need for hardening.  Fast Exposing, excellent resolution and dur...
Read More ››