Murakami’s Thickness Gauge accurately measures the difference between the mesh thickness and the emulsion thickness to obtain accurate emulsion over meshmeasurements. EOM percentages from 4-12% are common with the lower amount typical for graphics and the upper amount typical for water base and discharge printing.
- Consistent Emulsion Over Mesh creates predictable exposures. Once a screen mesh exposure time has been calculated, all following screens will have similar performance on press, for all applications.
- Hand Coating: Typically in a busy apparel shop there may be multiple workers who coat screens. When their screens are measured with a thickness gauge the EOM can range from 0% to 20% using the same coater. Once their EOM percentage is known there are techniques to apply that can bring coating under control.
- Automatic Coating: A thickness gauge helps determine the EOM of coated screens and allows the operator to adjust pressure, speed and number of strokes to achieve the target EOM for his applications
Click here to contact us.